Cadencia Lefebvre Hardwood Flooring July 27, 2019 02:12:10
Solid hardwood flooring is milled from a single piece of lumber, and it is available either unfinished and prefinished. Unfinished hardwood flooring is sanded, stained, and coated onsite after installation. This method allows for custom stain colors to match a home`s décor, or simply to create a unique appearance. The downside to unfinished flooring is that there is often a considerable mess from sanding the flooring as well as fumes from the stain and urethane coatings. High quality contractors do have equipment that will minimize the dust from sanding process. They may also offer low VOC stains and water-based urethane coatings to reduce the fumes associated with oil-based products. This finishing process can be done multiple time in the future to restore the beauty of the floor as it wears over time. Solid hardwood flooring is best installed over a wood subflooring material as it is generally nailed or stapled to the subsurface. Always install solid wood flooring above grade as it is highly susceptible to moisture and may warp in damp areas.
You also need to choose between one of the two methods of laying hardwood panels down with the glue down method. Your choices for installing hardwood flooring are the Walk On method or the Wet Lay method.
Health: because wood doesn`t trap debris in the way carpet does, the air in the house is usually fresher and cleaner. This is especially important for people with allergies or respiratory illnesses who need constant clean air in and around the home.
Final Preparation for Installing Hardwood Flooring-When using the glue down method for installing hardwood flooring, it is absolutely essential that the surface where you will be placing your flooring panels is properly prepared. You`ll be attaching your flooring panels to this surface, so the floor must be smooth, dry, and as clean as possible to give your hardwood floor a solid support base. Be particularly careful to clean up anything that looks like it may be grease or oil, as your glue may not properly bond.
Stains-Asian walnut hardwood usually comes stained in three different colors. Natural pertains to wood that has only been given a clear, protective finish in order for the natural color to be appreciated. This can range from a light shade to the more common darker hues. Cinnamon-stained, otherwise known as cherry-stained, Asian walnut hardwood boards have a vibrant, reddish hue. On the other hand, smoke- or toffee-stained hardwood has a slightly darker hue similar to the natural color of the black walnut wood. Because of this, Asian walnut hardwood is often used as an alternative since it is relatively more affordable than its cousin.
Lace Nails - You`ll use these nails when connecting the panels to walls and wall strips.Plywood Substrate Sheets - These are placed on top of the concrete and go underneath your hardwood floor.