Cadencia Lefebvre Hardwood Flooring July 17, 2019 02:06:56
Make sure you know your specific type of flooring and finish. You should also be sure to follow the specific manufacturer`s instructions for cleaning and general maintenance. Do some research on how to care for your particular kind of finish. For example, paste wax should never be used on polyurethane finish. Sweeping hardwood floors with a soft broom on a regular basis naturally buffs the surface, therefore protecting it from scratches. Another obvious advantage of this is that it will keep the floor clean. Where possible, leave shoes at the door to avoid dragging extra dirt and grime onto the floor. If not, consider using rugs in high traffic areas such as hallways and entrances to keep feet clean. Remove any solid materials from the floor such as sand, grit and dirt among others. These materials are abrasive and can dull and even scratch the floor`s finish. Use a dry towel to wipe spills and other messes from wood floors. Oils soaps should NEVER be used on hardwood floors. These oils will eventually build up and will dull the surface of the floor. In addition to this, it will make it difficult to refinish the floor whenever needed. Use a vacuum with a bare floor attachment. Such a vacuum easily removes dirt and dust without scratching or otherwise damaging the floor. Do not drag furniture across the floor when moving it. Instead, lift the furniture when moving it. Where dragging is inevitable, invest in a set of slip-mats. Where these are not available, lids from plastic food containers work just as well. Use only cleaners that have specifically been manufactured for use on hardwood floors. Do not substitute with linoleum, laminate or tile cleaners as these can cause the floor to become extra slippery. Use as little water as possible when cleaning wood floors. Wet spots should also be immediately wiped up after cleaning.
Solid hardwood flooring is milled from a single piece of lumber, and it is available either unfinished and prefinished. Unfinished hardwood flooring is sanded, stained, and coated onsite after installation. This method allows for custom stain colors to match a home`s décor, or simply to create a unique appearance. The downside to unfinished flooring is that there is often a considerable mess from sanding the flooring as well as fumes from the stain and urethane coatings. High quality contractors do have equipment that will minimize the dust from sanding process. They may also offer low VOC stains and water-based urethane coatings to reduce the fumes associated with oil-based products. This finishing process can be done multiple time in the future to restore the beauty of the floor as it wears over time. Solid hardwood flooring is best installed over a wood subflooring material as it is generally nailed or stapled to the subsurface. Always install solid wood flooring above grade as it is highly susceptible to moisture and may warp in damp areas.
Advantages of Hardwood Flooring-There are many advantages attached to hardwood floor which is why this is one of the most popular types of floor on the home renovation market today. Some of the advantages in this case include:
Rubber Gloves - It`s much better to glue the fingers of your gloves together than your own fingers together! Besides, many people don`t like having dried glue on their hands for weeks after they finish installing hardwood flooring.
This kind of flooring is installed by nailing it to a subfloor of plywood or OSB. Natural hardwood floors are finished in place by sanding the boards to a uniform thickness and coating them with a sealer. When the sealer wears off and the surface darkens, the floor can be sanded and refinished, usually from 5-7 times, or until a nail becomes visible. The life expectancy of natural 3/4 hardwood flooring is about 100 years.
Lace Nails - You`ll use these nails when connecting the panels to walls and wall strips.Plywood Substrate Sheets - These are placed on top of the concrete and go underneath your hardwood floor.