Robinette Boulanger Hardwood Flooring July 29, 2019 02:51:35
Solid hardwood flooring is milled from a single piece of lumber, and it is available either unfinished and prefinished. Unfinished hardwood flooring is sanded, stained, and coated onsite after installation. This method allows for custom stain colors to match a home`s décor, or simply to create a unique appearance. The downside to unfinished flooring is that there is often a considerable mess from sanding the flooring as well as fumes from the stain and urethane coatings. High quality contractors do have equipment that will minimize the dust from sanding process. They may also offer low VOC stains and water-based urethane coatings to reduce the fumes associated with oil-based products. This finishing process can be done multiple time in the future to restore the beauty of the floor as it wears over time. Solid hardwood flooring is best installed over a wood subflooring material as it is generally nailed or stapled to the subsurface. Always install solid wood flooring above grade as it is highly susceptible to moisture and may warp in damp areas.
The final product in the Impressions hardwood flooring line is the 3/4" thick solid hardwood floor Classic Series. The Classic Series features a Hand-scraped surface and 3 colors of oaks to choose from. The Wheat Color available in this line is an extremely popular color that is a light coloring over natural and pulls on neutral tones to look great in any room. This product is 3/4" Thick solid hardwood floor and 5" wide with all 4 sides beveled to define the board. The Classic series features a Vintage Grade white oak hardwood custom selected to reflect the old world look and rustic styling. The Classic series carries a 50 year finish warranty & lifetime structural warranty and can be installed on or above grade. Each plank in this collection is hand crafted individually and is plantation grown making this a green hardwood flooring product. The finish on this product is a water based finish called Perma-Finish, which is a commercial grade finish that shows the grain in the hardwood underneath with more vivid coloring and when scratched doesn`t show coloring from the finish. This product is milled from 1 foot to 7 foot lengths with an average board length in the 4 foot range, making this a long board product that is great for large expanses.
Final Preparation for Installing Hardwood Flooring-When using the glue down method for installing hardwood flooring, it is absolutely essential that the surface where you will be placing your flooring panels is properly prepared. You`ll be attaching your flooring panels to this surface, so the floor must be smooth, dry, and as clean as possible to give your hardwood floor a solid support base. Be particularly careful to clean up anything that looks like it may be grease or oil, as your glue may not properly bond.
Natural Grain-Its unique loose, whirling grain pattern is another distinctive feature of Asia walnut hardwood. Depending on your preference, this can tempt you to use this type of hardwood for your flooring, or cause you to seek out other alternatives.
Some brands of engineered hardwood floors have a thin wear layer that can be recoated but you cannot sand the floor to stain it or completely refinish it. These less expensive brands have an expected average life span of 30-40 years depending on usage patterns. Other brands and styles have much thicker wear layers (5/32 inches) that can be sanded and refinished up to as many as 5 times with an average expected life span of from 60-80 years. Thicker wear layers are sawn from the log whereas thinner layers are scraped or sliced. High tech glue is the bonding agent.
The Cape Cod series is the front runner in this flooring line. The Cape Cod hardwood collection features 3/4" Thick solid Oaks & Brazilian cherry hardwood in widths of 3 " & 2 " for the Oaks & 3 1/4" & 5" for the Brazilian Cherry. The Select Grade hardwood is imperfection free with no signs of mineral streaks, knots or other bad features such as warping or poor milling. The Cape Cod Collection features an Aluminum Oxide finish that is free of pitting. The surface is so smooth on the Cape Cod that it puts many other high end brands finishes to shame. The Cape Cod Collection features a eased edge and square butt joint as many prefinished hardwood floors on the market today, carries an amazing 50 year warranty for finish and lifetime structural warranty. Cape Cod is produced from a renewable farm and is a green hardwood product that produces only a mere 3% waste factor and is constructed out of Appalachian Oak. This hardwood floor is capable of being sanded & refinished for a lifetime. One feature that stands the Cape Cod oaks apart from the rest of the Prefinished market is the fact that it is harvested & made in the USA. The Brazilian Cherry hardwood is harvested from a managed forest that is Lacey Act Compliant. The Brazilian Cherry of the Cape Cod collection is a TRUE clear grade hardwood floor and is guaranteed to have no Silica. The Cape Cod is just one of the 5 products in the Impressions Hardwood Flooring Line.