Paige Guillaume Hardwood Flooring June 23, 2019 08:06:42
Durability: hardwood is solid and sturdy, making it resistant to dents and scratches, which are part of daily life. This type of flooring is easily able to withstand heavy furniture as well as items being accidentally dropped on the floor.
It`s also very important that your sub floor be completely level and flat. If you notice any unevenness, get some patching cement from the hardware store to even the sub floor.
Installation Advantages-One other advantage of engineered hardwood floors is that a floating install can be applied directly over vinyl or a concrete slab or any other existing material that is hard and level without the expense and necessity of a subfloor. Manufacturers recommend that a 4-6 mil vapor barrier be installed over the under-surface if moisture is likely to be a problem.
The Walk On method of installing hardwood flooring requires precise panel laying. This process of installing hardwood flooring waits until the glue is very tacky and then lays the panel in the glue. This keeps you from getting glue smudges all over your panels as you go. Experienced hardwood installers typically use the Walk On method because of the better finished results it can provide. Since you are reading instructions about how to install hardwood floors, we`ll assume you`re using the Wet Lay method.
Natural Hardwood Floors-Oak is the most prevalent hardwood species used for flooring, but a variety of other hardwoods like bamboo, maple, hickory and red cherry are also available. Natural hardwood flooring consist of solid 3/4 inch narrow, unfinished tongue and groove boards called strips (3-4 inches wide) or wider boards called planks (5-7 inches in width). Both board styles lay the same way but interior designers say that the wider planks, sometimes distressed, impart a more casual or country look to the decor.
Engineered hardwood flooring is a mix of multiple layers of wood veneers and a synthetic material that are laminated together to form each plank of flooring. This synthetic material serves as the bottom layer and is generally impervious to moisture. This resistance to moisture from below makes this an excellent choice for concrete subfloors and rooms that are below grade. All engineered flooring comes prefinished from the factory. The advantage to prefinished engineered wood flooring is that the factory is often able to coat the finish as many as 7 times or more. This creates an extremely durable surface that will stand up to a great deal of traffic. Still, the top layers of engineered flooring are made of natural wood and can be scratched or damaged by water. Engineered hardwood flooring tends to be much thinner than solid hardwood flooring and it is often glued to the subsurface though it can also be nailed or stapled. The thinner nature of engineered flooring reduces or eliminates the option of refinishing the floors when they wear over time.