Tiffney Marechal Hardwood Flooring July 21, 2019 02:42:03
It`s also very important that your sub floor be completely level and flat. If you notice any unevenness, get some patching cement from the hardware store to even the sub floor.
Solid hardwood flooring is milled from a single piece of lumber, and it is available either unfinished and prefinished. Unfinished hardwood flooring is sanded, stained, and coated onsite after installation. This method allows for custom stain colors to match a home`s décor, or simply to create a unique appearance. The downside to unfinished flooring is that there is often a considerable mess from sanding the flooring as well as fumes from the stain and urethane coatings. High quality contractors do have equipment that will minimize the dust from sanding process. They may also offer low VOC stains and water-based urethane coatings to reduce the fumes associated with oil-based products. This finishing process can be done multiple time in the future to restore the beauty of the floor as it wears over time. Solid hardwood flooring is best installed over a wood subflooring material as it is generally nailed or stapled to the subsurface. Always install solid wood flooring above grade as it is highly susceptible to moisture and may warp in damp areas.
Maintenance: as you will soon discover, hardwood floors are very easy to clean and generally care for. The inherent properties of the wood make it resistant to dirt and stains such that they don`t stick to the floor. Most of what is needed is regular vacuuming and moping with a damp cloth or mop. In addition to this, unlike carpet, wood doesn`t fade and will retain its original color for a long time to come.
Circular Saw - You`ll use your circular saw to cut up panels as necessary. Additionally, you`ll use your circular saw to score your substrate sheets every eight inches. This is important for the prevention of curling panels.
The next engineered collection by Impressions Hardwood is the Traditions Series. This collection brings engineered hardwood flooring to the market with a hand-scraped surface. The Traditions series is a 6" wide by 1/2" thick engineered hardwood with a 2mm sawn face wear layer available in oak or plantation teak. This product is finished with a commercial grade Perma-Finish water based finish to pull the look of the hardwood through the finish to the homeowners view. This artisan hand-scraped finish is done perfectly with no rough ridges, just nice smooth rolling scrapings. The Traditions series Oaks are colored in Rocky mountain or Yellowstone which are two of the most beautiful dark brown colors in the flooring market today, and the Plantation Teak is natural in color. The Teak is a lacey Act Compliant Vintage grade that is hand-picked for a quality floor for the new owner. The Oak is a Vintage Red Oak that is custom crafted for an Old World look and is hand-picked to give this floor the look you want in a nice rustic atmosphere. This product just like the rest of the Impression line sports a 50 year finish warranty & a lifetime Structural warranty. The construction of this product is a hardwood base panel to go along with the thick 2mm wear-layer that can be sanded & refinished 1 time.
Carpenter`s Crayon - This is what you use to mark where you`ll make your cuts on your panels. You`ll also use this to mark up the surface where you`ll be laying your panels. You`ll want to keep this handy at all times because it is particularly important with the glue down method that everything be done very precisely.