Paige Guillaume Hardwood Flooring July 28, 2019 15:34:54
Another force to reckon with in the prefinished hardwood line is the Hampton Series. The Hampton Solid Hardwood Flooring line features 3/4" Thick 6 - sided sealed Oak flooring that has square edged & ends just like a floor that is laid in unfinished than site finished. The 6 sided seal improves the moisture resistance in this flooring product dramatically and achieves the best square edge product on the market today. The Hampton series is available in 5 colors: Natural, Saddle, White Oak Natural, Honey & Gunstock. The color choices for the Hampton series are based off of the top 5 colors selling in the country today by designers & builders. The Six Sided seal is a feature ONLY available in the Hampton series anywhere in the world and is provided by Ten Oaks of Virginia. The finish on this hardwood product is a UV Cured urethane as well as aluminum oxide on the top of the product, and is pre-sealed on all six sides. The Hampton Series is a green product that is produced from Appalachian Oak and can be sanded & finished for a lifetime. The Hampton Series like the rest of the Impressions hardwood flooring line features a 50 year warranty for finish and a lifetime structural warranty. The Hampton Series is produced by a AHMI Member which is a sustainable hardwood forest product. This product is available in a 2 " & 3 " wide product.
The glue down method of laying hardwood floors is one of the original methods of installing hardwood flooring. If you want to learn the basics of how to install hardwood flooring using the glue down method, you`ve come to the right place. Among do it yourself hardwood floors, those done with the glue down method can be the most stable and enduring. When you are installing hardwood flooring using the glue down method, you can rest assured that you are using a technique that has been time-tested.
Make sure you know your specific type of flooring and finish. You should also be sure to follow the specific manufacturer`s instructions for cleaning and general maintenance. Do some research on how to care for your particular kind of finish. For example, paste wax should never be used on polyurethane finish. Sweeping hardwood floors with a soft broom on a regular basis naturally buffs the surface, therefore protecting it from scratches. Another obvious advantage of this is that it will keep the floor clean. Where possible, leave shoes at the door to avoid dragging extra dirt and grime onto the floor. If not, consider using rugs in high traffic areas such as hallways and entrances to keep feet clean. Remove any solid materials from the floor such as sand, grit and dirt among others. These materials are abrasive and can dull and even scratch the floor`s finish. Use a dry towel to wipe spills and other messes from wood floors. Oils soaps should NEVER be used on hardwood floors. These oils will eventually build up and will dull the surface of the floor. In addition to this, it will make it difficult to refinish the floor whenever needed. Use a vacuum with a bare floor attachment. Such a vacuum easily removes dirt and dust without scratching or otherwise damaging the floor. Do not drag furniture across the floor when moving it. Instead, lift the furniture when moving it. Where dragging is inevitable, invest in a set of slip-mats. Where these are not available, lids from plastic food containers work just as well. Use only cleaners that have specifically been manufactured for use on hardwood floors. Do not substitute with linoleum, laminate or tile cleaners as these can cause the floor to become extra slippery. Use as little water as possible when cleaning wood floors. Wet spots should also be immediately wiped up after cleaning.
How to care for hardwood flooring-As mentioned earlier, installing hardwood floors is a significant investment which therefore requires proper maintenance to protect your investment and enjoy it for as long as possible. With that in mind, below are some helpful tips on hardwood flooring:
The next engineered collection by Impressions Hardwood is the Traditions Series. This collection brings engineered hardwood flooring to the market with a hand-scraped surface. The Traditions series is a 6" wide by 1/2" thick engineered hardwood with a 2mm sawn face wear layer available in oak or plantation teak. This product is finished with a commercial grade Perma-Finish water based finish to pull the look of the hardwood through the finish to the homeowners view. This artisan hand-scraped finish is done perfectly with no rough ridges, just nice smooth rolling scrapings. The Traditions series Oaks are colored in Rocky mountain or Yellowstone which are two of the most beautiful dark brown colors in the flooring market today, and the Plantation Teak is natural in color. The Teak is a lacey Act Compliant Vintage grade that is hand-picked for a quality floor for the new owner. The Oak is a Vintage Red Oak that is custom crafted for an Old World look and is hand-picked to give this floor the look you want in a nice rustic atmosphere. This product just like the rest of the Impression line sports a 50 year finish warranty & a lifetime Structural warranty. The construction of this product is a hardwood base panel to go along with the thick 2mm wear-layer that can be sanded & refinished 1 time.
Once you have committed to installing Asian walnut hardwood floors and have selected the type of stains and finish you want, the next step involves selecting the supplier of your flooring boards. Basically, you can purchase hardwood flooring from local dealers, branches of a commercial chain of home improvement establishments, liquidators, and hardwood flooring wholesalers.