Paige Guillaume Hardwood Flooring July 12, 2019 06:15:44
Engineered hardwood floors are a laminate built from multiple ply layers with a thick hardwood veneer wear layer on top. The veneer layer is available in almost any exotic hardwood species with exotic color and grain patterns. Engineered hardwood floors are more resistant to moisture than natural wood flooring, which adds to their appeal because they can be installed in damp regions of the country and in basements with relatively high humidity levels.
The Cape Cod series is the front runner in this flooring line. The Cape Cod hardwood collection features 3/4" Thick solid Oaks & Brazilian cherry hardwood in widths of 3 " & 2 " for the Oaks & 3 1/4" & 5" for the Brazilian Cherry. The Select Grade hardwood is imperfection free with no signs of mineral streaks, knots or other bad features such as warping or poor milling. The Cape Cod Collection features an Aluminum Oxide finish that is free of pitting. The surface is so smooth on the Cape Cod that it puts many other high end brands finishes to shame. The Cape Cod Collection features a eased edge and square butt joint as many prefinished hardwood floors on the market today, carries an amazing 50 year warranty for finish and lifetime structural warranty. Cape Cod is produced from a renewable farm and is a green hardwood product that produces only a mere 3% waste factor and is constructed out of Appalachian Oak. This hardwood floor is capable of being sanded & refinished for a lifetime. One feature that stands the Cape Cod oaks apart from the rest of the Prefinished market is the fact that it is harvested & made in the USA. The Brazilian Cherry hardwood is harvested from a managed forest that is Lacey Act Compliant. The Brazilian Cherry of the Cape Cod collection is a TRUE clear grade hardwood floor and is guaranteed to have no Silica. The Cape Cod is just one of the 5 products in the Impressions Hardwood Flooring Line.
Solid hardwood flooring is milled from a single piece of lumber, and it is available either unfinished and prefinished. Unfinished hardwood flooring is sanded, stained, and coated onsite after installation. This method allows for custom stain colors to match a home`s décor, or simply to create a unique appearance. The downside to unfinished flooring is that there is often a considerable mess from sanding the flooring as well as fumes from the stain and urethane coatings. High quality contractors do have equipment that will minimize the dust from sanding process. They may also offer low VOC stains and water-based urethane coatings to reduce the fumes associated with oil-based products. This finishing process can be done multiple time in the future to restore the beauty of the floor as it wears over time. Solid hardwood flooring is best installed over a wood subflooring material as it is generally nailed or stapled to the subsurface. Always install solid wood flooring above grade as it is highly susceptible to moisture and may warp in damp areas.
If you choose the Wet Lay method for installing hardwood flooring, you`ll be putting glue across the substrate followed by placing the hardwood panel on top of the glue. After the glue starts to become tacky, you proceed to the next panel. However, sometimes it is recommended for first time installers using the glue down method to place the next panels before the glue becomes tacky so that you can adjust your panels a few minutes later if they are not lined up properly.
Versatility: hardwood is one of the most versatile materials for flooring. No two hardwoods are exactly the same, which means each house gets a unique look as far as the floor goes. In addition to this, wood naturally has different patterns meaning that you will not be stuck with a particular shade or color.
Rubber Gloves - It`s much better to glue the fingers of your gloves together than your own fingers together! Besides, many people don`t like having dried glue on their hands for weeks after they finish installing hardwood flooring.