Robinette Boulanger Hardwood Flooring July 27, 2019 02:12:14
If you choose the Wet Lay method for installing hardwood flooring, you`ll be putting glue across the substrate followed by placing the hardwood panel on top of the glue. After the glue starts to become tacky, you proceed to the next panel. However, sometimes it is recommended for first time installers using the glue down method to place the next panels before the glue becomes tacky so that you can adjust your panels a few minutes later if they are not lined up properly.
Installation Advantages-One other advantage of engineered hardwood floors is that a floating install can be applied directly over vinyl or a concrete slab or any other existing material that is hard and level without the expense and necessity of a subfloor. Manufacturers recommend that a 4-6 mil vapor barrier be installed over the under-surface if moisture is likely to be a problem.
Engineered hardwood flooring is a mix of multiple layers of wood veneers and a synthetic material that are laminated together to form each plank of flooring. This synthetic material serves as the bottom layer and is generally impervious to moisture. This resistance to moisture from below makes this an excellent choice for concrete subfloors and rooms that are below grade. All engineered flooring comes prefinished from the factory. The advantage to prefinished engineered wood flooring is that the factory is often able to coat the finish as many as 7 times or more. This creates an extremely durable surface that will stand up to a great deal of traffic. Still, the top layers of engineered flooring are made of natural wood and can be scratched or damaged by water. Engineered hardwood flooring tends to be much thinner than solid hardwood flooring and it is often glued to the subsurface though it can also be nailed or stapled. The thinner nature of engineered flooring reduces or eliminates the option of refinishing the floors when they wear over time.
Lace Nails - You`ll use these nails when connecting the panels to walls and wall strips.Plywood Substrate Sheets - These are placed on top of the concrete and go underneath your hardwood floor.
This kind of flooring is installed by nailing it to a subfloor of plywood or OSB. Natural hardwood floors are finished in place by sanding the boards to a uniform thickness and coating them with a sealer. When the sealer wears off and the surface darkens, the floor can be sanded and refinished, usually from 5-7 times, or until a nail becomes visible. The life expectancy of natural 3/4 hardwood flooring is about 100 years.
You also need to choose between one of the two methods of laying hardwood panels down with the glue down method. Your choices for installing hardwood flooring are the Walk On method or the Wet Lay method.