Paige Guillaume Hardwood Flooring June 19, 2019 06:39:29
The cost of hardwood flooring is usually higher if you source them from home improvement establishments and local dealers. The latter has the advantage of possible price negotiations and typically offering free samples. Liquidators and flooring wholesalers both offer competitive prices. However, the latter`s supply of hardwood flooring cannot be guaranteed and no warranty is usually offered. Floorboard wholesalers offer hardwood flooring at more affordable rates and are more reliable stocked. Furthermore, most will ship free samples to prospective buyers. Make sure to compare suppliers to be able to get the best deal possible.
The Cape Cod series is the front runner in this flooring line. The Cape Cod hardwood collection features 3/4" Thick solid Oaks & Brazilian cherry hardwood in widths of 3 " & 2 " for the Oaks & 3 1/4" & 5" for the Brazilian Cherry. The Select Grade hardwood is imperfection free with no signs of mineral streaks, knots or other bad features such as warping or poor milling. The Cape Cod Collection features an Aluminum Oxide finish that is free of pitting. The surface is so smooth on the Cape Cod that it puts many other high end brands finishes to shame. The Cape Cod Collection features a eased edge and square butt joint as many prefinished hardwood floors on the market today, carries an amazing 50 year warranty for finish and lifetime structural warranty. Cape Cod is produced from a renewable farm and is a green hardwood product that produces only a mere 3% waste factor and is constructed out of Appalachian Oak. This hardwood floor is capable of being sanded & refinished for a lifetime. One feature that stands the Cape Cod oaks apart from the rest of the Prefinished market is the fact that it is harvested & made in the USA. The Brazilian Cherry hardwood is harvested from a managed forest that is Lacey Act Compliant. The Brazilian Cherry of the Cape Cod collection is a TRUE clear grade hardwood floor and is guaranteed to have no Silica. The Cape Cod is just one of the 5 products in the Impressions Hardwood Flooring Line.
If you choose the Wet Lay method for installing hardwood flooring, you`ll be putting glue across the substrate followed by placing the hardwood panel on top of the glue. After the glue starts to become tacky, you proceed to the next panel. However, sometimes it is recommended for first time installers using the glue down method to place the next panels before the glue becomes tacky so that you can adjust your panels a few minutes later if they are not lined up properly.
Solid hardwood flooring is milled from a single piece of lumber, and it is available either unfinished and prefinished. Unfinished hardwood flooring is sanded, stained, and coated onsite after installation. This method allows for custom stain colors to match a home`s décor, or simply to create a unique appearance. The downside to unfinished flooring is that there is often a considerable mess from sanding the flooring as well as fumes from the stain and urethane coatings. High quality contractors do have equipment that will minimize the dust from sanding process. They may also offer low VOC stains and water-based urethane coatings to reduce the fumes associated with oil-based products. This finishing process can be done multiple time in the future to restore the beauty of the floor as it wears over time. Solid hardwood flooring is best installed over a wood subflooring material as it is generally nailed or stapled to the subsurface. Always install solid wood flooring above grade as it is highly susceptible to moisture and may warp in damp areas.
Installing natural hardwood flooring is labor intensive and time consuming. Laying down, sanding and sealing a hardwood floor usually takes several days. Installation time can be reduced with pre-finished hardwood flooring which eliminates the application and drying time of the finish and sealer. Pre-finished flooring is usually more wear resistant because the manufacturer can apply more durable coatings in a controlled factory environment. Homeowners should also consider that on site finishing will emit noxious VOCs into the house environment.
Square Notched Trowel - This trowel should have one quarter inch sides for the application of the glue.Broom and Dust Pan - You`ll want to constantly be cleaning up any saw dust that could get stuck under your floor panels or get stuck in your connecting joints. The last thing you need is a lumpy hardwood floor when you`re done installing hardwood flooring.