Carressa Fontaine Hardwood Flooring June 23, 2019
Engineered hardwood flooring is a mix of multiple layers of wood veneers and a synthetic material that are laminated together to form each plank of flooring. This synthetic material serves as the bottom layer and is generally impervious to moisture. This resistance to moisture from below makes this an excellent choice for concrete subfloors and rooms that are below grade. All engineered flooring comes prefinished from the factory. The advantage to prefinished engineered wood flooring is that the factory is often able to coat the finish as many as 7 times or more. This creates an extremely durable surface that will stand up to a great deal of traffic. Still, the top layers of engineered flooring are made of natural wood and can be scratched or damaged by water. Engineered hardwood flooring tends to be much thinner than solid hardwood flooring and it is often glued to the subsurface though it can also be nailed or stapled. The thinner nature of engineered flooring reduces or eliminates the option of refinishing the floors when they wear over time.
Tiffney Marechal Hardwood Flooring July 09, 2019
Natural Hardwood Floors-Oak is the most prevalent hardwood species used for flooring, but a variety of other hardwoods like bamboo, maple, hickory and red cherry are also available. Natural hardwood flooring consist of solid 3/4 inch narrow, unfinished tongue and groove boards called strips (3-4 inches wide) or wider boards called planks (5-7 inches in width). Both board styles lay the same way but interior designers say that the wider planks, sometimes distressed, impart a more casual or country look to the decor.
Cadencia Lefebvre Hardwood Flooring July 09, 2019
Installing natural hardwood flooring is labor intensive and time consuming. Laying down, sanding and sealing a hardwood floor usually takes several days. Installation time can be reduced with pre-finished hardwood flooring which eliminates the application and drying time of the finish and sealer. Pre-finished flooring is usually more wear resistant because the manufacturer can apply more durable coatings in a controlled factory environment. Homeowners should also consider that on site finishing will emit noxious VOCs into the house environment.
Carressa Fontaine Hardwood Flooring July 09, 2019
Finishing-Most hardwood floors are sold with some form of factory finish. These consist of protective coats of polyurethane, aluminum oxide, or a combination of both, that are applied to protect the wood from wear and tear. The latest available factory finishes have been formulated to make hardwood flooring more scratch-resistant. In case you purchased unfinished flooring, it will still need to undergo finishing once the floors are installed. However, the quality of the finishing will not be as good as if it were finished in a factory.
Natalie Lemoine Hardwood Flooring July 09, 2019
Advantages of Hardwood Flooring-There are many advantages attached to hardwood floor which is why this is one of the most popular types of floor on the home renovation market today. Some of the advantages in this case include:
Paige Guillaume Hardwood Flooring July 09, 2019
The cost of hardwood flooring is usually higher if you source them from home improvement establishments and local dealers. The latter has the advantage of possible price negotiations and typically offering free samples. Liquidators and flooring wholesalers both offer competitive prices. However, the latter`s supply of hardwood flooring cannot be guaranteed and no warranty is usually offered. Floorboard wholesalers offer hardwood flooring at more affordable rates and are more reliable stocked. Furthermore, most will ship free samples to prospective buyers. Make sure to compare suppliers to be able to get the best deal possible.
Robinette Boulanger Hardwood Flooring July 09, 2019
Stains-Asian walnut hardwood usually comes stained in three different colors. Natural pertains to wood that has only been given a clear, protective finish in order for the natural color to be appreciated. This can range from a light shade to the more common darker hues. Cinnamon-stained, otherwise known as cherry-stained, Asian walnut hardwood boards have a vibrant, reddish hue. On the other hand, smoke- or toffee-stained hardwood has a slightly darker hue similar to the natural color of the black walnut wood. Because of this, Asian walnut hardwood is often used as an alternative since it is relatively more affordable than its cousin.
Tiffney Marechal Hardwood Flooring July 09, 2019
Value addition: 99.9% or realtors agree that hardwood floors add significant value to the home. This is both in the monetary sense, as well as the perceived value. Apart from hardwood floors increasing the price tag on the home significantly, they are also attractive to prospective buyers, which makes it easier to sell the house quickly and closer to the asking price should such a situation arise.